Handle Bars – Definition

Handle Bars are designed as a toddler-friendly choice, this battery-powered 4-wheeler features a large push-button on the handlebar for easy stop-and-go performance and travels a safe two mph on hard surfaces. Handlebars are simple bars with handles on the ends for steering a bicycle, motorcycle, etc. The bar used to run a bike, motorbike, or similar vehicle use plural.

The instrument panel also houses an onboard computer conveniently operated by a handlebar-mounted push-button. The handlebar, trapezoid headlamp, front mudguard and trimmed-down rear lids were new.

The most popular grade of aluminium for handlebars is 2014, but some manufacturers use 7000-series aluminium. 7075 is the strongest commercially available grade of aluminium, but 7010 and 7050 steps have better fracture toughness. The higher aluminium rates have better processing, but they all have similar yield and ultimate strength.

Things You Need to Know About Handle Bars

When designing a handlebar, engineers want to achieve both strength and flexibility. Aluminium has replaced Chromoly steel as the material of choice because engineers can design an aluminium bar of equal power that’s more flexible and one-third the weight of a steel bar. Handlebars temper for even more strength, at no cost to flexibility.

Uses of Handle Bar

A motorcycle handlebar is a tubular component of a motorcycle’s steering mechanism. Handlebars provide a mounting place for controls such as brake, throttle, clutch, horn, light switches and rear-view mirrors, and they help support part of the rider’s weight. Even when a handlebar is a single piece, it is usually referred to in the plural as handlebars.

Cross Handlebar

A 7/8-inch diameter tube isn’t strong enough for a handlebar. To achieve the necessary strength, a crossbar uses. Crossbars support the handlebars in the up/down directions but are ineffective in the forward/backward movements. Steel bars can employ a welded crossbar, but welding would compromise the strength of an aluminium bar, so its crossbars clamp on.

handle barsSwaging of Handlebars

The best way to increase the strength of a bar is to increase the diameter. Typical oversize bars are 1-1/8 inches, but Easton made a 1-3/8-inch bar (above). But, since grip and control sections must be 7/8 inches, the bars must be tapered. To get down to 7/8 of an inch, the oversize tubes are swaged by being forced through a die. After this process, the walls are thicker at the smaller-diameter ends. Thus, many bar manufacturers manipulate the wall thickness to feed more flex toward the end of the tapered bar.

Different Types of Motorcycle Handle Bars

Handlebars are one of the most critical components of your motorcycle. They are essential to the ergonomics of your bike, but they also help display your style to the rest of the world. Plus, relatively on a technical basis, handlebars house almost all of the controls of your bike.

Some prefer to ride long distances occasionally, while others may use their bike purely as a status symbol. Thus, motorcycle companies work tirelessly to bring you a wide variety of such motorcycle handles.

Now, it can be not very clear for beginner riders. Options market, it’s hard to pinpoint at any of these items and say, “Yes! This is the perfect one for me”. You also want to save some money. If you have a Bike EMI, the last thing you want is an overpriced accessory. Therefore, here we are going to see what the significant classes of motorcycle handlebars are and how they differ from one another:

Ape Hangers

With their altitudes generally between 12 to 16 inches, these ape hanger handlebars are on choppers. It would help if you double-check before buying one of these re the cable lengths of brake, clutch, and other components mounted on the handlebars. Typically, these handlebars require you to keep your hands at shoulder level. This makes riding a whole lot easier for many riders.

Beach HandleBars

These are somewhat similar to the Ape, as mentioned above, Hangers. Except for one feature. Rather than going up, these handlebars curve back towards the rider. These allow the hands of the rider to be in a much more relaxed position.

Buckhorn HandleBars

These handlebars are also very much similar to the Ape Hangers. They are structured to go up to a small height and then curve back towards the river as they allow the rider’s hands to rest in a comfortable position. These again make the experience of riding a motorcycle pleasant.

Clip-on HandleBars

These handlebars are attached to the front forks of the motorcycle. These handlebars fit above or below the triple tree. This makes them very easy for the rider to adjust them. They can also be mounted on the triple tree, in which case they become non-adjustable. These are on sports bikes. They are not that good for long rides as they make the rider lean forward a little bit.

Clubman Bars

This is a one-piece handlebar mounted on the motorcycle’s triple tree. These allow the rider to sit in a low or crouched position while leaning forward. Their body leans forward while ends angle backwards.

Cruiser Handlebars

These are long and rear sloped motorcycle handlebars. They let the rider sits in an upright position.


Technically, any nick outside a handlebar can create a weak point. Always using soft tie-downs when transporting a bike and avoiding collisions with flying rocks is ideal but unrealistic. Modern handlebars can withstand some abuse, but the aluminium is susceptible to deterioration. Even if there are no apparent signs of wear, it’s a good idea to replace your bars after a couple of full seasons. If a handlebar exposes 350 to 400 degrees, the heat treatment compromise.

This, in turn, makes the system more aerodynamic. These can mostly be on street races. However, they are not very uncommon among choppers.

Also Read: How to Start a car with Tweezers? – Explaining, Factors, And More